American Royal
- Details
Furnace are installed outside a building
Low maintenance time required
Easy clean flues
Reduced ashes due to very hot burn
Long time between ash removals
Easy ash removal with no grates, augers or ashpans
Extra large loading doors
Loading doors are waist-high
Large firebox
All controls are in one handy location
Controls are automatic start and stop
Water temperature gauge
Adjustable water temperature
Low water indicator
Shut off switch for fan
Outside light for night loading
Fits to standard 8" chimney if required
Quality and Design
Weatherproof caulked seams
All metal rustproofed
Stainless steel firebox and water jacket
All parts are precision made
Conventional round boiler design gives more strength
Less welding seams to fail
Extra strong steel framing
Complete steel floor under furnace
Rodent proof house design
Easy to remove cladding
Transportation
Some models will fit in back of pickup truck
All legs have tie downs
All legs have foot plates with mounting holes
Legs are reinforced
Can be loaded via roof hook or pallet forks thru door
Roof is part of wall and will not blow off
Installation Friendly
1 1/2" hookups for multi-buildings
Ample room to do installations on furnace
Pumps can be installed directly at furnace
All controls prewired and in one location
Electrical junction box ready for hookup
Rear door panel/compartment to handle all plumbing
Furnace sits up off ground to assist hookups
Installation easily completed within hours
Safety
Adjustable water temperature
Low water indicator
Non-pressurized system
Hi-limit safety switch
Smoke by-pass
Cool door design
Lockable fire door
Anti-flashback door safety catch
Insulated and offset handles
Design certified and tested by Wernock Hersey
Special air tight door design
Fan off caution light
Controls protected in steel box
Large door lip to prevent ash fallout
Performance
Easily burns junk wood including pallets
Reduced ashes
Powered air injection and directional air flow
Quick temperature recovery time
Flue temperature reduction system
Extended burn time
Large heating capacity
Reduced wood consumption
Heat exchanger water baffles
Can be hooked up to pressure system with exchanger
Large heat transfer area
Even water circulation for better heat transfer
Anti-creosote safety door lip
Non-stick door gasket
Sometimes It's Not What You Have . . . .But What You Don't Have That Makes For Quality And Performance
- No rubber bladders to break
- No grates to plug up, warp and break
- No augers to prevent complete ash removal
- No rubber door hoses to break
- No ashpans to worry about
- No controls accessible to door smoke
- No inside tubes to crack and bend
- No outside chimney to creosote
Highlights:
1/4" and 5/16" SA 36 steel assures safety and longevity.
Heavy-duty cast iron grates and door eliminate warping.
Standard Equipment
The stainless water stoves are sold complete with the following items: draft blower, aquastat and temperature gauge.
Accessories Available
Tubing, Water to Air Coils, Domestic Water Coils, Circulation Pumps, Additional supplies
1/4" and 5/16" SA 36 steel assures safety and longevity.
Heavy-duty cast iron grates and door eliminate warping.
Standard Equipment
The stainless water stoves are sold complete with the following items: draft blower, aquastat and temperature gauge.
Accessories Available
Tubing, Water to Air Coils, Domestic Water Coils, Circulation Pumps, Additional supplies
| Specifications Height To Chimney Top 84” Width 48" Length 72" Chimney Size 8" Door Size 18" X 17" Inlet / Outlet Sizes 1-1/2" Water Capacity (US Gal) 130 Wood Length 36"-40" Power Air Injection YES Maximum Burn Time* 24 Hr Avg, Heating Hrs - Fill* 8-12 Heating Area Up To* 4000 Sq. Ft. |
| Model 69 |
Model 100
Specifications
Height To Chimney Top 90”
Width 57”
Length 79"
Chimney Size 8"
Door Size 21" X 20"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 150
Wood Length 44"-50"
Power Air Injection YES
Maximum Burn Time* 36 Hr
Avg. Heating Hrs - Fill* 10-18
Heating Area Up To* 6000 Sq. Ft.
Height To Chimney Top 90”
Width 57”
Length 79"
Chimney Size 8"
Door Size 21" X 20"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 150
Wood Length 44"-50"
Power Air Injection YES
Maximum Burn Time* 36 Hr
Avg. Heating Hrs - Fill* 10-18
Heating Area Up To* 6000 Sq. Ft.
Model 200
Specifications
Height To Chimney Top 103”
Width 70”
Length 90"
Chimney Size 8"
Door Size 25" X 24"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 310
Wood Length 56"-62"
Power Air Injection YES
Maximum Burn Time* 48 Hr
Avg. Heating Hrs - Fill* 12-24
Heating Area Up To* 12000 Sq. Ft.
Height To Chimney Top 103”
Width 70”
Length 90"
Chimney Size 8"
Door Size 25" X 24"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 310
Wood Length 56"-62"
Power Air Injection YES
Maximum Burn Time* 48 Hr
Avg. Heating Hrs - Fill* 12-24
Heating Area Up To* 12000 Sq. Ft.
Model 300
Specifications
Height To Chimney Top 114”
Width 83”
Length 99"
Chimney Size 10"
Door Size 30" X 29"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 650
Wood Length 69"-74"
Power Air Injection YES
Maximum Burn Time* 48 Hr
Avg. Heating Hrs - Fill* 12-24
Height To Chimney Top 114”
Width 83”
Length 99"
Chimney Size 10"
Door Size 30" X 29"
Inlet / Outlet Sizes 1-1/2"
Water Capacity (US Gal) 650
Wood Length 69"-74"
Power Air Injection YES
Maximum Burn Time* 48 Hr
Avg. Heating Hrs - Fill* 12-24
Model 7300
Specifications
Dimensions W x L x Ht 56" x 57" x 94"
Estimated BTU 200,000
Water Capacity 100 Gallon
Door Size 20" x 24"
Approximate Weight 1300 lbs.
Log Length 26”
Fire Box Volume 13.0 cubic ft.
Supply & Return Fittings 2" ips
Flue Size 6"
Dimensions W x L x Ht 56" x 57" x 94"
Estimated BTU 200,000
Water Capacity 100 Gallon
Door Size 20" x 24"
Approximate Weight 1300 lbs.
Log Length 26”
Fire Box Volume 13.0 cubic ft.
Supply & Return Fittings 2" ips
Flue Size 6"
Model 7450
Specifications
Dimensions W x L x Ht 72" x 84" x 102"
Estimated BTU 500,000
Water Capacity 380 Gallon
Door Size 24" x 32"
Approximate Weight 2500 lbs.
Log Length 56”
Fire Box Volume 50.0 cubic ft.
Supply & Return Fittings 2.5" ips
Flue Size 8"
Dimensions W x L x Ht 72" x 84" x 102"
Estimated BTU 500,000
Water Capacity 380 Gallon
Door Size 24" x 32"
Approximate Weight 2500 lbs.
Log Length 56”
Fire Box Volume 50.0 cubic ft.
Supply & Return Fittings 2.5" ips
Flue Size 8"
The Royal stove delivers premium performance, easy operation and long-lasting quality. Ideal for
single-structure heating, the Royal stove can be sized to your needs.
The heating area which a stove can handle is affected by many factors such as; the heat loss of the building,
climate, insulation, wind, type of wood or coal, moisture content of the wood, etc.
single-structure heating, the Royal stove can be sized to your needs.
The heating area which a stove can handle is affected by many factors such as; the heat loss of the building,
climate, insulation, wind, type of wood or coal, moisture content of the wood, etc.
